Conso Electrical Science and Technology Co., Ltd は、11 415 kv 空気絶縁 AIS ミニ変電所を生産する専門メーカーです。商社や仲介業者を通じて国内外の電力会社、鉱山会社、化学プラントなどに小型変電所を製作しています。堅牢でコンパクトな変電所を製造するために、製造作業員は Conso Electrical で 10 年以上のキャリア経験を持っています。また、国際標準化機構の専門家が毎年当社の工場を検査し、Conso Electrical が ISO 規格の条項を要件として確実に実行していることを確認します。
1 Start by cleaning the porcelain casing and the outer shell. Next, inspect the outer shell, gaskets, and porcelain casing for any cracks, discharge marks, or aging of the insulating pads. Check for deformations in the cables and busbars. If any are found to be damaged, they should be replaced.
2 Examine the contact surfaces of the busbars to ensure they are clean. Remove any oxidation and apply electrical joint compound. Secure with new spring washers and screws. Check for any abnormalities in the insulators, spacing, and connections between busbars. Verify the reliability of the secondary winding terminal connections for current, voltage, and transformers as per the requirements.
3 Check the quality of the grounding system. Inspect whether the grounding wire is rusted or corroded. If severe corrosion is present, it should be replaced. Ensure that the insulation meets the required standards. If it does not meet the standards, it should be addressed.
4 Tighten the lead terminals, pins, grounding screws, and busbar connection screws. If any of these are loose, remove the screws, lightly file the grounding surface, and replace spring washers and screws until a good connection is established and it is reliable.
5 Inspect the capacitors, temperature controllers, and fans to ensure they are functioning properly. Verify the efficiency of the ventilation system. Replace any components that have issues.
6 Clean the dust from around the transformer and its accessories. Check for any oil leaks from the transformer, and address any leaking transformers accordingly.
![]()
Container Shell
|
![]()
Steel Shell
|
![]()
Laminate Shell
|
Compact Shell in Process |
Switchgear is Testing |
Daily Clean Up |
Workshop Overview |
KYN28 in Process |
HXGN12 in Process |
GCS in Process |
GIS in process |
Switchgear Assembled with the Shell